The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

gottattooz · 01-31-2022, 07:37 PM

I had the same problem with my Jeep build. The bottom radiator outlet and the water pump inlet were on top of each other. I bought some 1.5 inch turbo inter cooler piping with 180 degree elbow and plumbed it in line with a 90 degree hose out of the radiator and a 45 degree hose into the water pump. I attached screen shots of my build in the alternative tinkering section. If you want to see/read up on it, it's the jeep trailblazer SS build, page 6, starting at post #127.

-Josh

01-31-2022, 07:37 PM	#8
gottattooz Registered User Join Date: Apr 2008 Location: Hampton, Ga Posts: 883	Re: Fat Tire 56 project I had the same problem with my Jeep build. The bottom radiator outlet and the water pump inlet were on top of each other. I bought some 1.5 inch turbo inter cooler piping with 180 degree elbow and plumbed it in line with a 90 degree hose out of the radiator and a 45 degree hose into the water pump. I attached screen shots of my build in the alternative tinkering section. If you want to see/read up on it, it's the jeep trailblazer SS build, page 6, starting at post #127. -Josh Attached Images __________________ 1967 Buick Special wagon 1968 Jeep Wagoneer 1958 Chevy Panel Truck 2017 Suzuki M109R Last edited by Rickysnickers; 01-31-2022 at 09:04 PM.