The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Hubscrub · 02-22-2022, 09:38 PM

Since the front crossmember is mostly done, I was going to remove the cab to make it easy to flip the frame around to weld the bottom and clean it etc. But I decided to attack the major parts of the cab that need rust repair, while it's still mounted on the frame and at a decent height.So I've been working on the driver step and got it removed. The inner cab corner need some work as well as the outer.

02-22-2022, 09:38 PM	#91
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: Back to the fifties with a 59 project Since the front crossmember is mostly done, I was going to remove the cab to make it easy to flip the frame around to weld the bottom and clean it etc. But I decided to attack the major parts of the cab that need rust repair, while it's still mounted on the frame and at a decent height.So I've been working on the driver step and got it removed. The inner cab corner need some work as well as the outer. Attached Images __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14 Last edited by Hubscrub; 02-22-2022 at 10:30 PM.