Re: My 53 GMC 3/4 ton project
Quote:
Originally Posted by 6DoF
just a heads up for ya. i run the D52 calipers on the rear of a lot of my stuff, and my TJ should be light in the rear like your truck will be. a few tips ... just turn that adjustable proportioning valve down all the way and back off 1/4 turn so it doesn't stick. then even after that during soft braking around town you'll be using the rears pretty hard vs the front. they'll wear out pads quicker than you expect.
well, that assumes you use the same on the front and not some huge 6-piston
|
Thank you for the tip. I'll keep that in mind.
__________________
1953 GMC 3/4 ton: current project
1967 C20: 5.3 voretc with T5 conversion, 4 wheel 8 lug disc brake
1972 Nova: my 4 door sport sedan! 5.3 voretc + T5 conversion. drivable project, FUN!!
1979 Camaro Z28: 5.3 vortec conversion with build TH350: drivable project, Fun to drive
1992 Camaro RS convertible (Z28 clone): 5.3 conversion with build T5: on going project
2005 Silverado 2500, 4x4 Duramax, original owner
|