Re: Angie - 71 GMC C25
So, it turned out that the right inner rocker/floor edge was pitted. The left side had been previously replaced. I'd butchered the cheap replacement rocker on the right trying to get the inner out, and the metal was too thin for me to be able to weld so it came out too.
Got the new inner welded in, sprayed the underside of the cab in epoxy and then raptor liner. I'm calling the rust repair on the floor done, but still need to replace the right rocker and cab corner.
__________________
Rick
78 GMC K15 SWB, 350/NV4500/NP205/4.10s Project Hazel
71 GMC C25 350/TH400 - Project Angie
59 Chevy SWB Stepside (next in line? Not sure now )
2001 GMC Sierra K2500
|