The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**bhap** · 03-15-2022, 10:28 PM

American Autowire sells a kit with both sides of the plastic plug housing along with a selection of male and female Packard 56 terminals. You can get both the 6 pin engine harness plug and the 9 pin main wiring plug for about $15 or $20 each. Makes for a clean install. My original engine harness plug was a little melted near the top ignition wire.

03-15-2022, 10:28 PM	#9
bhap Senior Member Join Date: Mar 2006 Location: Pittsburgh, PA Posts: 246	Re: 1965 c10 wiring American Autowire sells a kit with both sides of the plastic plug housing along with a selection of male and female Packard 56 terminals. You can get both the 6 pin engine harness plug and the 9 pin main wiring plug for about $15 or $20 each. Makes for a clean install. My original engine harness plug was a little melted near the top ignition wire.