[mongocanfly]

Thanks Robert!!

Well , I didnt get the bumper mounted, I thought I had a long piece of 1/2×6 flat bar... but what I had was some long pieces 1/2×10 and 1/2×12,,, all the 6in wide stuff was short pieces,as expensive as that wider stuff is ,I couldnt bring myself to start whacking it up..I'll grab some 6in when i go thru town..
So i turned towards the exhaust.. I bought a couple of 30deg bends, then I made exhaust tips by cutting them off so they would be parallel to the ground, got all this cleaned up and welded them on
I also made a cad design for the bumper mounts while I was at it