Quote:
Originally Posted by lkt1954
On the 69 C10 with a 350 and air, I would like to replace the current electric fan bolted through the radiator with a dual fan.
Any suggestions on what is a good set-up that requires minimal fabrication and doesn't break the bank?
Also with either a single or dual fan set-up, do I need to install an original shroud?
Thanks
|
https://www.classicperform.com/tech_.../Fantastic.htm
Bolts right in! This is what I used with the stock radiator.
Don't use the relays that come with it though, too bulky and complicated...
I used this here:
https://www.summitracing.com/parts/msd-75643
Good luck!