So while I carried on with the second seat harness mount, @nickwheeler took a look at the wipers that came last week.
Very quickly realising they would be needing some adjustment on every level.
1. Mounting plate and Rivnuts to the frame.
2. Shorter arms, a lot shorter (think headlight arms)
3. Shorter wipers. 8” or 200mm as those supplied are 300mm
So we carried on working side by side at more of these small necessary jobs.
First mounting plate made up.
Even the small screws needed replacing from the magic tub with slightly longer ones.
Tried out.
Looks good.
Yes, that works.
Bolted up, spacing works.
Both sides done.
Another couple of small jobs included getting the passenger footwell firewall kickplate carpeted. Looking plush in there now.
And finding where I had hidden these bonnet/hood catches……
Making up some backing plates and finding small nuts and screws to attach them to fenders and hood.
Attached.
And finally, stepping away
Wipers and arms too long, need something shorter.
Bonnet catches in place.
A short day unfortunately, as the rear light units were not delivered on Friday or Saturday as promised by Ebay.
Busy week ahead.
Have a good one all.