Quote:
Originally Posted by kwmech
Something new for me as I've apparently never come across this. I have had to use spacers b'cuz of the non-dimple frame however.
|
There are different sized Saginaw boxes but I believe have have the smaller. I have a saginaw on the parts rack off a 1 ton and just the housing is longer by at least an inch.
I purchased the readhead 2856 (3 Turns): 1980-1991 (for o ring stile fittings to match ls pump side). Which is a 4 bolt direct fit up to a 67 c20 frame. For reference the bolt patterns are the same at least up to 70 that I have physically confirmed. Some manual boxes are only three bolt but again the pattern is the same. 7/16" bolts.