Quote:
Originally Posted by layinrocker65
That’s probably your issue. If your oil pressure sensor is a one wire unit, the ecm doesn’t read it. I had to use the DD sensor in my 74. Just used the port above the oil filter.
|
Yep. That was the deal. I had the port cover from ICT billet with the 1/8" npt hole in it. Swapped that puppy on and routed the DD oil pressure sensor... now we're reading on all fronts! Stoked! Had to quit early due to family obligations, but everything is wired up, programmed and set up. Just need to tidy up all the wires and put it all back together. I'm super happy to have working gauges and a tach!
Untitled by
awesome_adawson, on Flickr