Quote:
Originally Posted by R.O.B.
Thanks guys, so I can probably wire them together and be ok.
Since they both come off the battery area, I wonder why there's 2 wires.
|
Don't tie them together.
Think of it like this. One point is closer to the battery, and the other to the alternator. The (as labelled) battery gauge reads the difference in the two voltages. If the alt is charging, the gauge will read charge because alt voltage is higher than battery voltage.
To change the subject, not the fusible link in the diagram above and to the right of the battery. Make sure you have one, since without it a short can cause the harness to fry.