The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - LockDoc's "Low Budget", "Low Maintenance" Project Thread

**LockDoc** · 08-09-2022, 11:27 PM

-
I also installed the exterior heater box and blower motor. I installed new rope chalk around the perimeter of the box and installed the heater core. (I forgot to take pictures of the core install) I pressure washed the core and flushed it out good before I installed it.

I had an A/C blower motor that I lubed up and tested before installation.

Worked on the wiring a little more and got more of it sorted out and straightened up. The little stuff takes a lot of time.

LockDoc
.

08-09-2022, 11:27 PM	#223
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,348	Re: LockDoc's "Low Budget", "Low Maintenance" Project Thread - I also installed the exterior heater box and blower motor. I installed new rope chalk around the perimeter of the box and installed the heater core. (I forgot to take pictures of the core install) I pressure washed the core and flushed it out good before I installed it. I had an A/C blower motor that I lubed up and tested before installation. Worked on the wiring a little more and got more of it sorted out and straightened up. The little stuff takes a lot of time. LockDoc . Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 08-09-2022 at 11:35 PM.