The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Bunky · 08-27-2022, 08:51 PM

Ok so I went out and took the cylinder out and removed the switch from the dash. All (3) three tabs were in the notches, so I rotated the switch and then the key was at 3 o'clock position. So I put it back in and still is not straight up and down..

So as I'm watching the video on removing the tumbler he states the 67 will not have ACC position, Mine does. Do I have the wrong switch ??

08-27-2022, 08:51 PM	#4
Bunky Registered User Join Date: Jun 2022 Location: Battle Creek Mi Posts: 56	Re: Ignition switch not straight Ok so I went out and took the cylinder out and removed the switch from the dash. All (3) three tabs were in the notches, so I rotated the switch and then the key was at 3 o'clock position. So I put it back in and still is not straight up and down.. So as I'm watching the video on removing the tumbler he states the 67 will not have ACC position, Mine does. Do I have the wrong switch ??