|
Re: Convert bench seat from spring to full foam type.
The flex-O-Lator springs come in different widths and can be found here . Along with the tension springs .
https://www.albrightssupply.com/springs
The seat frames of the 70 model are close , You will need to use a barrier type material between the foam and springs to protect the foam from getting cut thru . Rather than using an aftermarket foam you may be better served by just buying a block of foam and using a cheap turkey carving knife to cut and shape the foam . https://www.amazon.com/Proctor-Silex...53328878&psc=1
But yes given some time and creative effort it can be done . 
__________________
1967 Factory short bed - Old school
'71 - 350 / 4bolt / 487 heads / Edelbrock C3BX
Muncie M-22 4 speed / Hurst Comp plus
Factory 12 bolt posi 3.73 / 255-70-15
Smoothed firewall / Factory cowl induction
Power disc brakes / power steering / 3.5-5" drop
|