|
Re: Pitman arm Question
Many thanks for the advise given. I fear replacing that part as I've heard the splines on aftermarkets are sometimes indexed differently and though they'll fit, they cause the pitman to be askew. I just ran the nut down on the pitman arm and the stud will rotate with a wrench on it and moderate pressure. Not tight but I can't turn it with my fingers. It has no discernable side to side play.
I'll inspect the frame rail too.
I laughed at myself for not realizing that stud has to turn in it's bore! Lol!
Much thanks for the advise.
|