The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Factory Guy** · 10-27-2022, 04:49 PM

So the Cylinder heads had no MAJOR issues both now have all the valves "lapped in"

Started by cleaning the valves with a red scotch brite pads.

Surfaces are all decked and found to be flat.

New PAC 1218 Springs are installed now (needed for the new camshaft). New valve seals were installed as well.

I think they turned out pretty good!

10-27-2022, 04:49 PM	#145
Factory Guy Senior Member Join Date: Jun 2019 Location: Midway USA Kentucky Posts: 540	Re: My New Truck So the Cylinder heads had no MAJOR issues both now have all the valves "lapped in" Started by cleaning the valves with a red scotch brite pads. Surfaces are all decked and found to be flat. New PAC 1218 Springs are installed now (needed for the new camshaft). New valve seals were installed as well. I think they turned out pretty good! Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=791250 Last edited by Factory Guy; 10-27-2022 at 04:55 PM.