The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Trailing arm crossmember with No Limit Arms

Joyridin · 12-23-2022, 11:46 AM

I used the No Limit rear trailing arm kit, but I got a piece of 4" steel sewer pipe and sawed off 2 pieces about 3/8" wide. I just cut round holes int he crossmember and welded them in place. Now you can easily put a 3" exhaust through the holes.

Did you get their front end kit also?

12-23-2022, 11:46 AM	#8
Joyridin Registered User Join Date: Sep 2020 Location: Cleveland, Ohio Posts: 488	Re: Trailing arm crossmember with No Limit Arms I used the No Limit rear trailing arm kit, but I got a piece of 4" steel sewer pipe and sawed off 2 pieces about 3/8" wide. I just cut round holes int he crossmember and welded them in place. Now you can easily put a 3" exhaust through the holes. Did you get their front end kit also?