The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**clay68c10** · 12-30-2022, 01:40 PM

The back was a little more involved. The mount points are wide at the outboard side, off the edge of the flat part of the floor. They're also not the same distance back from the front.
I cut the mount hole portion off, reversed it, and welded it back on the opposite seat and the same length as the inboard side.
The first 2 pics are the driver seat, the last is the passenger.

12-30-2022, 01:40 PM	#209
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,905	Re: ClusterTruck; because that’s what it is The back was a little more involved. The mount points are wide at the outboard side, off the edge of the flat part of the floor. They're also not the same distance back from the front. I cut the mount hole portion off, reversed it, and welded it back on the opposite seat and the same length as the inboard side. The first 2 pics are the driver seat, the last is the passenger. Attached Images __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ Last edited by clay68c10; 12-30-2022 at 01:45 PM.