The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

PDW HOTRODS · 01-15-2023, 03:27 PM

Get something 1/4 inch thick and put it in the channel and pry it back and forth a little all around the channel. I used a piece of plexiglass about 2" by 8 or 10 inch. That channel can bend easy and could be pinched a little somewhere. It doesn't take much to make the glass tight.

01-15-2023, 03:27 PM	#7
PDW HOTRODS Registered User Join Date: Nov 2006 Location: Sutherlin Oregon Posts: 495	Re: 1952 Chevy 3100 Pickup Get something 1/4 inch thick and put it in the channel and pry it back and forth a little all around the channel. I used a piece of plexiglass about 2" by 8 or 10 inch. That channel can bend easy and could be pinched a little somewhere. It doesn't take much to make the glass tight.