The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Need a quality US Made HEI recommendation for my 250 I6

72SB · 01-26-2023, 05:12 PM

OP

You might want to un tape the wiring harness that yellow wire to dizzy is in to see if it has any more splices and with the ones using butt crimp connectors..remove those and solder the wires together first putting heat shrink on one wire first to cover the solder connections.

01-26-2023, 05:12 PM	#19
72SB Registered User Join Date: Apr 2022 Location: Moorpark, CA Posts: 720	Re: Need a quality US Made HEI recommendation for my 250 I6 OP You might want to un tape the wiring harness that yellow wire to dizzy is in to see if it has any more splices and with the ones using butt crimp connectors..remove those and solder the wires together first putting heat shrink on one wire first to cover the solder connections.