The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**omodified** · 02-10-2023, 11:55 PM

The body is starting to be taken apart. Last bit of massaging before finish primer. Also, holes were drilled in the bed wood for the mounting bolts. Still need to open the tops of the holes a little more later, since the mounting bolts are the carriage type.

Decided not to drill the hole in this location on both sides. I believe this hole is a provision for a spare tire carrier.

02-10-2023, 11:55 PM	#275
omodified Senior Member Join Date: Jul 2010 Location: Race City U.S.A. Posts: 1,005	Re: "Midnight Rider" 1970 C10 SWB Fleetside The body is starting to be taken apart. Last bit of massaging before finish primer. Also, holes were drilled in the bed wood for the mounting bolts. Still need to open the tops of the holes a little more later, since the mounting bolts are the carriage type. Decided not to drill the hole in this location on both sides. I believe this hole is a provision for a spare tire carrier. __________________ Board Member #87725 My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=813848 Last edited by omodified; 03-19-2023 at 11:07 AM.