The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Question for the Electrical Gurus; Distributer not getting juice during cranking.

RichardJ · 03-07-2023, 02:28 PM

>>Anyway, wouldn't the solenoid stay activated with current coming from the ignition circuit during "Run"?<<

Is you purple wire hot in the Run position?

Is your new switch exactly the same as the old switch with the acc position. Post #2 from rusty is probably correct.

read through this thread about the '67 and later Ign sw.

http://67-72chevytrucks.com/vboard/s...d.php?t=735184

03-07-2023, 02:28 PM	#11
RichardJ Registered User Join Date: Apr 2010 Location: So Cal Posts: 1,416	Re: Question for the Electrical Gurus; Distributer not getting juice during cranking. >>Anyway, wouldn't the solenoid stay activated with current coming from the ignition circuit during "Run"?<< Is you purple wire hot in the Run position? Is your new switch exactly the same as the old switch with the acc position. Post #2 from rusty is probably correct. read through this thread about the '67 and later Ign sw. http://67-72chevytrucks.com/vboard/s...d.php?t=735184 __________________ '67 GMC 2500, 292, 4spd, AC