[mongocanfly]

Me to Dale..!!!.. I'm gonna do the paint 1st though..

So after getting a chance to do some sanding, I found a couple of spots on the back of the cab I just wasnt happy with.. these spots are where the inside cab brace is welded in.. it gave a high/low spot on the outer cab skin.. so I did some hammer dolley work on it and skimmed it with filler.. the drivers side was way worse than pass side..
Then after going over the cab ,I decided to just respray the whole cab with epoxy.. and high build..
So got it all resanded with 80g and started taping everything up today..
Hopefully paint coming soon
This is the 2 spots I worked on .. I couldnt get it "perfect " but hopefully itll be ok