The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 47-55.1 Firewall or Under Floor Mounted Master Cylinder?

mick53 · 04-14-2023, 07:25 PM

I'm staying with the under cab setup. I have Wilwood 12.88" disk with 6 piston front and 4 piston rear. I'm running a Wilwood master and prop valve with remote polished reservoirs and hydraulic throwout bearing on my Tremec TKO 600. Duel diaphragm booster with Leed vacuum pump because of my 6-71 on my 292. I'm running electric P/S from EPAS Performance and a 1.5 steering quickener on stock column and box. I'm also running an electric A/C compressor from RenCool in Australia that mounts under the truck with a hortazontal mount remote condenser and spal fan. I have lots of shiny stuff on my 292 and want to keep the engine compartment looking stock. JMHO.

04-14-2023, 07:25 PM	#39
mick53 Registered User Join Date: Oct 2018 Location: Warsaw IN Posts: 884	Re: Firewall or Under Floor Mounted Master Cylinder? I'm staying with the under cab setup. I have Wilwood 12.88" disk with 6 piston front and 4 piston rear. I'm running a Wilwood master and prop valve with remote polished reservoirs and hydraulic throwout bearing on my Tremec TKO 600. Duel diaphragm booster with Leed vacuum pump because of my 6-71 on my 292. I'm running electric P/S from EPAS Performance and a 1.5 steering quickener on stock column and box. I'm also running an electric A/C compressor from RenCool in Australia that mounts under the truck with a hortazontal mount remote condenser and spal fan. I have lots of shiny stuff on my 292 and want to keep the engine compartment looking stock. JMHO.