The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Bunky · 04-20-2023, 04:45 PM

So I converted my 67 from drum to disc and power steering. I had to add the 1/4" spacers to frame. So it goes down the road fine, but the wheel is off so I want to align it.

I read that when the gear box is centered the rag joint bolt should be top dead center and 2 of the grooves in the ptman arm shaft should be parallel with the gearbox. Is this correct?

Can my steering wheel be 1/4 turn off on the shaft ?

04-20-2023, 04:45 PM	#1
Bunky Registered User Join Date: Jun 2022 Location: Battle Creek Mi Posts: 56	Steering question So I converted my 67 from drum to disc and power steering. I had to add the 1/4" spacers to frame. So it goes down the road fine, but the wheel is off so I want to align it. I read that when the gear box is centered the rag joint bolt should be top dead center and 2 of the grooves in the ptman arm shaft should be parallel with the gearbox. Is this correct? Can my steering wheel be 1/4 turn off on the shaft ?