[Toro]

Okay, still struggling with this. No problem with gravity feed on the front, open the bleeders and fluid freely runs out. Not the same with the rear, barely a few drops. With top off the MC, I can see active flow of fluid from bottom of front reservoir shooting up when pedal is applied. I don't see the same in the rear reservoir. Proportioning valve is locked with screw in bleeding tool in place of brake light hookup. To check that fluid is making it past prop valve going to rear, I unscrewed line at back of prop valve and I can see fluid coming out when brake pedal is applied, but it's not a lot. So, should I be seeing that steady flow coming up from bottom of rear MC like I do from the front? Thanks again.