I think I posted this picture of the parking brake cable somewhere else, but I made some pulleys to route the cable, because there was nowhere up in the frame for it anymore. I ordered some rollers for wire rope from mcmaster.com and plasma cut and welded the little brackets. I had to use a custom length cable, something dorman sells that has a cable and some fittings.
I didn't initially respond to your thread because you said your fuel lines run up passenger side and I ran my on drivers. You can kind of see it in this photo, but the hardlines leave the top of the frame flush with the firewall and then I just ran 12(or 16?) inch premade teflon lined hoses to the fuel rail. I have a return line from my fuel rail back, I'm not using the corvette style regulator/filter.
I'll see if I can get another picture.