Quote:
Originally Posted by jessemthompson
Are you measuring the pushrods correctly? What are you using to measure them? BTR makes and adjustable pushrod to do measuring with. Also, with dual valve springs you’re going to have valvetrain noise, it inevitable.
|
i am using a push rod checker i have to keep taking it in and out to measure it with a dail caliper there is not enough room to twist the pushrod checker on the head it seems like everytime i think i have the lengths rite i will turn the engine over and they will change i am up to using 7.500 puhrods now and they still clatter i used the pushrod checker and measured one push rod to 7.612 and at 7.612 the valve spring is completely down and the valve hits the piston so between 7.500 and 7.612 is far as i can go with the rocker i am doing something wrong and dont know what i am wondering if i need to buy a set of ls adjustable rockers ?