|
Re: Bad vibration...
Quote:
Originally Posted by dmjlambert
It sounds like you might have found it. To confirm it, what I would probably do is jack up the right rear and remove the wheel, and put a straight edge such as a carpenter's square on the mounting surface of the axle and mark the floor with a pencil where the straight edge points. Then rotate the axle and repeat several times.
|
Pretty hard to bend a floating axle . If something is bent I would think the hub or axle tube to be bent since the axle itself doesn’t hold any weight the drum and hub do . I would look at the drum itself and check the bearings
__________________
Mark
72 c20 custom camper Husky edition,
66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark
1969 AMX ,
1968 c20 stepside ,85 K20
1977 Suburban sold
68 anniversary.
|