Re: Alignment Specs?
Quote:
Originally Posted by kens65fb
I got these specs from another site, do they seem right, any opinions?
Suggested Alignment Specs:
CAMBER minus .5 degrees
CASTER +3.0 to +5.0 degrees
TOE IN 1/16" to 1/8" TOE IN
|
That's a good target to shoot for & my 'standard'.
I target NEG .5 Camber & tell them to dial in as much Caster as they can w/that Camber set-point as the priority.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|