The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Questions About A Steering Column Failure

Dead Parrot · 08-14-2023, 03:37 PM

Below most of of the guts like turn signal, ignition and such, there are 3(4?) screws that when loose can cause a lot of slop. If those sheered, might cause your problem. Don't know any easy way to check without pulling all the guts.

They may be what attaches the upper shaft to the u-joint. I haven't had to go further then that yet.

08-14-2023, 03:37 PM	#4
Dead Parrot Registered User Join Date: Aug 2012 Location: Oklahoma City, OK Posts: 2,496	Re: Questions About A Steering Column Failure Below most of of the guts like turn signal, ignition and such, there are 3(4?) screws that when loose can cause a lot of slop. If those sheered, might cause your problem. Don't know any easy way to check without pulling all the guts. They may be what attaches the upper shaft to the u-joint. I haven't had to go further then that yet.