[cj847]

I really like your stereo setup. However, a word of caution. Test it with the motor running before you reassemble the truck. My stereo was mounted in a similar manor, and I am still trying to determine what is causing my alternator noise in the music. When you search the internet for what to do/what not to do, I see some potential problems.
Some things I have done that are supposed to fix the issue:
-Power and ground wires must be separated.
-Ground wire should be 18" or less.
-Amp should be completely isolated from any metal (ie I mounted mine to plywood).
-Source wires should be run opposite side of the vehicle from the power wire. -Use high quality patch cables.
-Each component should be grounded separately.
-Ensure the receiver has a good ground. Otherwise, it will get ground from the antenna.
-Use filters as a last resort. (I did and it helped but didn't fix completely).
-I even changed my alternator and plug wires.
-Make sure your grounds between battery, engine, frame, and cab are good.

Anyway, you may turn yours on and it will sound great. If so, count your blessings. The stereo has been the most frustrating part of my build.

In my case, I think one of my components must be defective. I just have to figure out which one.