|
Re: Cheap carrier bearing or...?
what does the angle of the shaft look at normal ride height? picture doesn't show it clearly. If the angles are way out of spec, the bearing can only do so much. Is the bearing directional, like angled one way or the other? was the bearing hard to install/align?
I would say the bearing was not the fault but more likely drive line angles caused the failure..
post some good pictures of the angles of the shaft and going through the center support area
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
|