Quote:
Originally Posted by Grounded63
Depending on the type of body line your talking about, and your access. A body line with a peak, that has dings, or has been flattened. My favorite tool, is a dolly made from a 3" wide masons chisel. You need to profile and polish it. Round the edge over, and lay the outer corners back. So they don't dig in. That with a fairly heavy metal slapper/spoon. And a decently stout hammer. Not a body hammer. You can hammer the peak back where you want it. And profile the outer contour with the slapper.
|
It’s the outward peak roughly in the middle of the door. They’re always bashed in somewhere where I can’t get behind it. Your method would work great if I had access. I guess I could unskin the door to do that.