Quote:
Originally Posted by Toro
My early 72 Flint Blazer (September build, double-wall, and speaker under A/C controls) has the same "71" seat pointed out here. The outer right and left "male" belts are bolted under the flaps of the sewn seat cover, and the cover has to be taken off the access the bolts. The center two belts are attached to two middle legs, just like the first picture above in post #2 by 1970cstblazer.
|
The SPID from the St. Louis Blazer with the rear seat in the first photo:
__________________
1970 K/5 Blazer CST 4WD, Bronze, 93k ACT. miles, 350, 4 speed, positraction, 16.5" x 8.25" wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration in progress...
1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor...
2017 Sierra 1500 SLT 4WD, Black, 41k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2...
2019 Canyon SLT 4WD, White, 60k miles, 3.6, 8L45, 3.23 LS, 18" wheels