The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 250L6 to 71 350 - Can I use the 250L6 Pressure plate setup on the 350?

**Wrenchbender Ret** · 02-20-2024, 01:09 PM

It really depends on what kind of use you have in mind & the size of the clutch that is in it. If it is an 11 in. clutch you are ok. If it is a 10 in. it will work if you are not going to do some heavy pulling. The flywheel will fit also.
A smaller clutch makes shifting easier & is better for the syncros in the trans.

George

02-20-2024, 01:09 PM	#3
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,195	Re: 250L6 to 71 350 - Can I use the 250L6 Pressure plate setup on the 350? It really depends on what kind of use you have in mind & the size of the clutch that is in it. If it is an 11 in. clutch you are ok. If it is a 10 in. it will work if you are not going to do some heavy pulling. The flywheel will fit also. A smaller clutch makes shifting easier & is better for the syncros in the trans. George