The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

NuBomb · 08-21-2004, 07:44 PM

I measured the third row seat from my 99 suburban and it is fine as long as width goes. There are four pockets is the floor to accept the seat. It looks like you could cut the pockets out of a salvage suburban and weld them in to the floor on ours. I think it would work, but you may have to move it depending on structural members under the floor.

08-21-2004, 07:44 PM	#10
NuBomb Registered User Join Date: Jan 2002 Location: Canton, Georgia, USA Posts: 1,119	I measured the third row seat from my 99 suburban and it is fine as long as width goes. There are four pockets is the floor to accept the seat. It looks like you could cut the pockets out of a salvage suburban and weld them in to the floor on ours. I think it would work, but you may have to move it depending on structural members under the floor. __________________ Jeremy (NUBOMB) 72K5 CST 350/350/205 1951 Chevy 1/2 ton North Georgia Group "... And the first rule to being a man is you gotta spend your life doing crap you don't wanna do." Red Forman.