The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Bob B.** · 03-18-2024, 10:08 PM

Dana 44's are common REAR axles on GMC 1/2 ton trucks up to '68, both 4X2 and 4X4.. A non-floating Dana 60-35 was optional. I think there are a few options for the older Dana 44's, you might want to check the axle shaft spline count as that's one of the things that change with year and application. For street and mild off-roading I like the Eaton Detroit True-Trac.

03-18-2024, 10:08 PM	#8
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,309	Re: Dana 44 question Dana 44's are common REAR axles on GMC 1/2 ton trucks up to '68, both 4X2 and 4X4.. A non-floating Dana 60-35 was optional. I think there are a few options for the older Dana 44's, you might want to check the axle shaft spline count as that's one of the things that change with year and application. For street and mild off-roading I like the Eaton Detroit True-Trac. __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.