Quote:
Originally Posted by VictoriaHardware
Don't get to worried-
The center hole is 2.75" and the originals are 3.5". They may work on front disc conversions, but will not fit on a rear axle.
The backspacing is 4.25" vs the Military wheels which are 3.875". For those with drop spindles the increased backspacing will not help at all with clearance to the LCA. The Military wheels require LCA trimming as it is.
They're 7" wide, not 8".
|
I was just notified that the wheel specs on my website were incorrect. The center hole specs were wrong (they were specs for a smaller bolt pattern). And a couple had the backspacing listed wrong. Sorry for the confusion. All the specs have been corrected. Center hole for the 5 lug truck pattern is 3.125 and for the 6 lug pattern is 4.25" Backspace was also corrected to 4.125" for the 15x8's.