[Wwes]

A couple issues I have to tackle with the interior:
1. Windshield washer - the "new" harness has the provision for the remote washer. I'll either have to convert it to that, and splice the new line into the existing line, or I'll have to splice the existing style wire into the "new" control. Will wait and tackle this once I have battery power again.
2. Headlamp switch - the 84+ switch and bezel I planned to use is higher in the dash than the current switch. That means I'll have to cut the sheet metal dash to get the switch centered correctly. Not quite fond of that idea, but i'll do it.
3. The new column did not have a neutral safety switch. I just wired the purple and yellow wires together and taped them off. Any better ideas?