Quote:
Originally Posted by Wwes
Here's on issue I'm contemplating - I bought a new core support to do the 89-91 front end conversion, but after seeing the red truck above I've decided to stay stock. BUT, the original core has a good amount of rot on the lower corner, I could cut the replacement bottom off and weld it to the original. I'm concerned about the ultimate strength of the core though.
Thoughts?
|
Is it not possible to return the core support and get the right one? Welding a piece on the original should be ok as long as the rest of it is strong enough. It would certainly be easier to just use a new part if possible.