The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**kwmech** · 11-01-2019, 09:03 PM

From a 350, you'll need the 27 spline input. Back of the 700 is 27 spline. You can either get the spacer for the back of the trans or change the output shaft of the trans to get the spacing correct for the adapter.

11-01-2019, 09:03 PM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,397	Re: HELP w/ 700r and 205 From a 350, you'll need the 27 spline input. Back of the 700 is 27 spline. You can either get the spacer for the back of the trans or change the output shaft of the trans to get the spacing correct for the adapter.