Kit is in! Come with Adapter plate, Hydraulic throw out bearing spacer and new pilot bearing. Fabbot has an instruction video on Youtube. Most of it is self explanatory, but it helped with the proper torque settings for the bolts. Modifying the bell housing was really easy, due to it being aluminum. Used the adapter to mark what has to come out and drilled (2) holes in the side for the fluid feed and bleeder. I opted for the optional AN-3 fitting to get rid of GM's quick connect. This will make it easier to connect to a universal slave. Its held in with a retaining pin and new is provided, if you mangle it getting it out
.All went together very easily and I'm very happy with the quality of the kit.