Re: Wizit's bagged 60 GMC build V2.0
Quote:
Originally Posted by Wizit247
Take a look at Kartek's site. They have the Speedway Engineering bars in solid, 0.188, and 0.250 wall in lenghts from 32" up to 39.5 in one inch increments.
$150 for the bar is about as cheap as your going to get for a quality product.
|
I checked out the Kartek site. Unfortunately, the increase in OD significantly impacts price. $156 for the 1.250" solid bars but jumps to $700 for 1.5" solid @ 36" width w/no hollow option (for something possibly between the two choices). The 1.5" bars are also 35-spline requiring that spec arm which are also priced higher.
The search continues.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|