[rechinca]

Seam sealer done on the inner cowl and the gutters. Had to go with the heavy bodied 3M. I wanted to use the self leveling but my shipment was delayed for at least a week and I needed to make progress.

Next up was finish the firewall for epoxy primer. Glad I decided to tear it all off as the lower hole for the emergency brake did not look good. A lot of cracks around it. And I am not really sure why, but if you are doing some work, grind the paint down there and inspect it! I didn't see it until the paint was gone. I welded it back up and will use a thick washer there when I assemble it.