[BossHogg69]

Well, it quit raining long enough for me to get started on this little project. First, I broke out the good 'ol DeWalt reciprocating saw and did away with the old system, but not before I took a few pics. I cut it off right behind the transmission crossmember, as this is where the X-pipe will go in, approximately 18" behind the passenger side header collector, and right after the bend of where the driver side pipe crosses over from under the tranny. i also included some pics of where the sway bar brackets interfered with the tailpipes I had before. When I originally chopped off the tailpipes, I took the tips and welded them onto the cut off pipe on the mufflers to get back the exhaust tone I lost from taking off the tailpipes.