Personally I would recommend buying a new piece of metal for this. Metal has grains like wood, and when you bend with the grain you are liable to crack it. Especially metal that was molded 30 years ago.
If you do it, put a piece of scrap metal on top of all you bends to make the bend radius bigger and lower the chance of cracks.
Mario
__________________
Mario and Mandy
Hughesville, MD 20637
69 C10 305/350
71 K5 Basket case
75 K10 Rescue **Parting out**
77 MG Midget **Parting out**
15 6.7L Cummins
|