Quote:
Originally Posted by Gobuffalo
The bracket is for the external fuel filter only. If there are any leaks (which there shouldn't be, if I did this right) they will be fixed as this is high pressure fuel.
LockDoc, I saw, in another members post, where you wrote about wind wing rubbers. I'm having the same problems with proper fit. I've ordered some from CP to see if that helps. Have you ever delt with the windshield trim. I purchased new rubber and a new trim kit, they don't fit for squat. Had a glass guy come out and try with a different rubber ( made by Prestige) same problem. His rubber fit way better but the stainless trim won't stay in the rubber as you pull it in. He told me the only ones that fit are the factory originals. It's like they are not bent correctly. It pops out at the top corners and the bottom about a foot from the sides. Any help?
|
The wind wing rubber gaskets I used were from here:
http://www.classicparts.com/1967-197...departments/7/
I didn't have any problem with fit or function.
The glass guy would be correct as far as the trim. 90% of the aftermarket stuff won't work. You are much better off finding some dent free original pieces and polishing them.
LockDoc