|
Re: C20 to K20 Conversion "Simply Toxic"
Once I got the lower mount figured out, I was able to see how much I needed to notch the frame for the coil spring. Added a plate to the back side of the frame st stiffin' it up and then cut and added supports for the notch. Just need to make the top spring mount and removable upper shock mount. For the front coils I'm using '06 F250 front coil +2 lift springs, and F-150 +4 shocks. I'm making the coil/shock mounts, so they can be easily converted to coil over shocks in the future.
|