|
Re: 1958 Pontiac Wagon Build
3drburb, yes, you are right, this 350 was lying around, so I freshened it up, put the HO heads on it to up the compression, and it should be good to go. (and gave it some paint)
The 1958 Pontiac/Chev floor pans that are available are awful, and only include the footwell section, and the rot on this goes far beyond that. I am going to try to make my own floor pans.
Well, I started on the lower A pillars because they need to be done before I can start on the rockers. So I cut out the rot, and made some replacement pieces, the pics are of drivers side, but I did both sides
I also added a a piece to the toe board to get it ready for a floor pan
Up next will be the Pass. side rockers
|